Skip to content Skip to main menu

Product

Rotary Kiln

Home > Product > Rotary Kiln
Continuous Rotary Kiln Furnace
※unit(mm)
Characteristics
  • 1. It has a compact structure.
  • 2. It is a rotary pump, so it is possible to conduct internal substitution.
  • 3. It can be operated in various atmospheres such as air, O2, Ar, n2, H2, vacuum, etc.
  • 4. Continuous operation is possible and it is simple to handle the fired materials.
  • 5. For using an alumina tube and graphite tube, the temperature of use will be up until 1650 degrees Celcius and 2400 degrees Celcius, respectively.
  • 6. We input the atmosphere gas to the inside of Klin, so we can manufacture products with fast response and uniformity.
  • 7. Product discharge temperature is below 50 degrees Celcius. (There is gas until the exit.)
  • 8. For Klin materials, there are high purity Al2O3, graphite, quartz, inconel, nickel, titanium, SUS 304, 316, 316L, 310, 310S, copper, aluminium, etc.
    According to atmosphere, the range of use and Klin size are decided. (For Al2O3, 300 - 500 Dia. X 3000 – 5000L) The lowest temparature is 50 degrees Celsius.
  • 9. There is no problem due to the heating rate and cooling rate.
  • 10. For rotating Klin, AC Servo Motor was used (stepless speed change), and the tilt angle is manually stepless.
  • 11. For the heater, SiC, Carbon, MoSi2, Kanthal, Wire, W, Mo Rod, etc. are used according to temparature and atmosphere.
  • 12. According to temperature and atmosphere, ceramic molded insulating material, graphite, etc. are used for insulating materials.
    • 13. It is simple to replace a heater.
Batch Type Al2O3 Tube Rotary Kiln
※unit(mm)
Temperature of use 100 ℃ ～ 1550℃ ※Can be changed according to consumer needs
Atmosphere for use Air, Ar, n2, H2, NH3, O2 and other various gases
Kiln material Al2O3 Pipe (Wings are attached inside.)
Heating dimension inside Klin 100 ~ 235 ID x 100 ~ 1200L
Control method 1~5 zone, Program control method
Sample input feeder All Stainless
Number of revolutions of Klin 표준 0.2 ~ 2 R.P.M
Characteristics It was developed for firing of powers for batteries and various powders. You can adjust the atmosphere freely because it is a batch type machine.
Note Klin material can be changed according to consumer needs.
Chain block method Rotary KILN
※unit(mm)
A B
Process Tube Quartz Inconel
Atmosphere of use N2, Ar, Air, H2+N2, H2
Vacuum device Rotary Pumping (For vacuum replacement)
Temperature of use 1000℃
Heater Kanthal Al Module Heater
Insulating material Ceramic molded insulating material
Temperature control method 3 Zone control method
Characteristics
  • 1. The chain block type enables you to work in a lower position, which shows its excellent safety and workability.
  • 2. It is easy to clean the process tube.
Optional items Feeding System
TNRK 1500M
※unit(mm)
Temperature of use 1500℃
Temperature distribution Within +/- 2℃
Heating element Molybdenum Rod Heater
Atmosphere H2 , H2 + N2 , N2
Tube size 95 ID x 1800L
Heat zone 900L
Insulating material Ceramic Board
Powder feeder Sealed type
Control 3 zone control
TNRK 1100K1
※unit(mm)
Temperature of use Max. 1100℃
Heating element Kanthal A1
Atmosphere Vacuum / H2 + N2
Tube 139 OD x 2500L
Heat zone 1700 mm L
TNRK 1200K1
※unit(mm)
Temperature of use 850℃
Heating element Kanthal A1
Atmosphere Air, O2
Tube size 300Φ x 2500L , Quartz tube
Heat zone 300Φ x 1800L
Control 3 zone control
Power 35 KVA
top